ELECTRO FREEZE Soft Serve Model GEN-5099
16
185242
5 Operator Controls
(continued)
12 Power Switch
See Figure 5-3
In the “ON” position, power is supplied
to the beater motors. Use this position
to operate the freezer. Select the ”OFF”
position for disassembly and cleaning.
See Operators Display Menu for use of
this switch in recording cleaning cycles.
Figure 5-3
L1
2
3
4
5
6 7 8
9
10
2
4
L2
R1
R2
1
LEFT
RIGHT
OFF
OFF
6 Operator Display Menus
To Enter the Operator Menu, push and hold the hidden key (11) under the F for 3 seconds
(figure 6-1).
The operator menu will show up on the screen (figure 6-2). The cursor will highlight the selected
sub-menu (i.e. Basic Setting, Actual Temps, etc.), use the Arrow Buttons to move the curser up or
down to the desired sub-menu. Once the desired menu is highlighted, in this example we will use
Basic Settings, press the select ( ) button to enter the sub-menu. Product Type and Temperature
Offset will be shown for left and right barrel. Use the Arrow Buttons to move the cursor to highlight
the value to be changed, once highlighted press the select button and the cursor will now be
blinking. While the cursor is blinking the value may now be changed using the left or right Arrow
Buttons, once you have reached the desired setting press select ( ) one more time, the cursor
will now stop blinking, this indicates that the value change has been stored. Follow these steps to
change any other desired settings, once complete you may use the far right Function button to exit
the operator menu or just wait and the menu will time out and return to the Home screen.
Figure 6-1
Figure 6-2
Summary of Contents for Electro Freeze GENESIS GEN-5099
