ELECTRO FREEZE Soft Serve Model GEN-2080
185240
1
1 Introduction
The GEN-2080 Freezer is designed to
produce soft serve ice cream, ice milk,
yogurt, and similar frozen dairy products,
with a product serving temperature range
of 15 to 25°F (-9 to -4°C). It also produces
shakes with a product temperature of
26°F (-3°C). If such products are prepared
from powdered concentrate, they should
be precooled to 40ºF (4°C) prior to
introduction to the freezer. Use of other
products in this machine is considered
misuse (see Warranty).
This manual has been prepared to assist
you in the proper operation and general
maintenance of the Electro Freeze Soft
Serve and Shake Freezer Model GEN-
2080.
Your freezer will not compensate for or
correct any assembly or priming errors
made during the initial start-up. Therefore,
it is important to follow the assembly
and priming procedures detailed in this
manual.
Make sure all personnel responsible for
equipment operation completely read and
understand this manual before operating
the freezer. When properly operated and
maintained, the freezer will produce a
consistent quality product.
If you require technical assistance, please
contact your local authorized Electro
Freeze Distributor as follows:
Name:__________________________
Address: ________________________
________________________________
Phone: __________________________
For factory service assistance — contact
H. C. Duke & Son, LLC., Electro Freeze
Service Department as follows:
Phone:
(309) 755-4553
(800)
755-4545
FAX:
(309) 755-9858
E-mail: service@hcduke.com
2 Note to Installer
This freezer must be installed and serviced by an Electro Freeze Distributor or
authorized service technician.
After installation the warranty registration card must be completed and
returned to validate the warranty.
Summary of Contents for Electro-Freeze Genesis Series
Page 2: ......
Page 10: ......
Page 26: ...ELECTRO FREEZE Soft Serve Model GEN 2080 16 185240 5 Part Names and Functions Shake Figure 5 2...
