ELECTRO FREEZE Soft Serve Model GEN-2080
185240
11
4 Part Names and Functions
— Soft Serve
The following descriptions apply to figure 4-2. The number preceding the
part name corresponds to the number in the figure.
1.)
BUSHING - CYLINDER:
Holds the
beater in place at the front of the cyl-
inder.
Center must be lubricated.
2.)
SHAFT - ASSY. BEATER:
Rotates
in the freezing cylinder, blending air
and mix as it ejects product.
3.)
BLADE - SCRAPER SOFT SERVE:
Scrapes the frozen product from the
freezing cylinder wall.
Important:
Soft serve blades only have 2 holes
and are not interchangeable with the
3 hole shake blades. If the incorrect
blades are used the freezer could be
damaged.
4.)
O-RING - SHAFT SEAL:
Seals the
beater shaft to the shaft seal. Is
inserted into the shaft seal bushing.
Must be lubricated.
5.)
WASHER - SHAFT SEAL:
Holds
the shaft seal o-ring.
Lightly lubri-
cate the side opposite the cup
seal.
6.)
SEAL(CUP) - BEATER SHAFT:
Seals the opening between the
freezing cylinder and the beater
shaft.
Do not lubricate rubber cup
portion
.
Summary of Contents for Electro-Freeze Genesis Series
Page 2: ......
Page 10: ......
Page 26: ...ELECTRO FREEZE Soft Serve Model GEN 2080 16 185240 5 Part Names and Functions Shake Figure 5 2...