22. Connect the aileron and motor Y leads to the
corresponding leads coming out of the wings.
23. Connect the motor wires coming out of the wings
to the supplied UBEC unit.
26. Carefully identify the different propellers, there
are 2 standard and 2 reverse rotation. Above
you will see the starboard wing motors, use the
reverse rotation propellers this side.
27. Fit the standard rotation propellers to the port
wing motors.
25. Set-up showing a 1300mAh 3S battery in the
nose with the receiver just behind. Power up the
system and check the motors and servo
operations.
6
24. Remove the lead weight that is glued into the
nose.
Note: If fitting the optional retracts then leave the lead weight in place.
Avro Lancaster V3
Summary of Contents for Avro Lancaster V3
Page 19: ...16 Made in China...
