Motor does
not run
1. Charge the battery
2. Replace the battery in the
transmitter.
3. Check motor ESC
connections.
PROBLEM SOLVING:
1. Motor/
connection error
1. Swap around any 2 of
the 3 ESC/motor wire
connections
1. The servo
connected
to
Rx incorrectly.
2. The servo is damaged.
1. Make sure the servo leads
are connected properly.
2. Replace servo.
1. Control surfaces not centered.
2. CoG is not in the correct
position.
1. Adjust the trims on the
transmitter.
2. Re-position
suggested.
Phenomenon
Typical error
Problem solving
1. The battery is not full charged
2. The battery of the transmitter is
low on power.
3. Something is disconnected in
the plane
12
H-Kings 990mm span Plug & Fly sports-scale F6F hot rod!
