13
•
The machine will turn off automatically
in 10min without operation under PAUSE
status.
•
It is also a knob for setting timer, speed,
temperature, heat power, with increasing
when turn the knob clockwise, and
decreasing when turn the knob anti-
clockwise, or choosing among the 15 auto
programs.
TIMER
•
The LCD screen shows
, it
means hour: minute: second.
•
Press timerbuttonand the minute
signal on LCD flicker; Turn the knob to
adjust the minutes. Press it again, the
second signal on LCD flicker, turn the knob
to adjust the seconds. Press it again, the
hour signal on LCD flicker, turn the knob to
adjust the hours from 1-12h.
•
Press the timer during working
process, the machine starts to count down
directly.
•
Max 60min by manual setting; max 3h
under DIY setting. The timer limit of each
program please refer to chapter "MENU"
below.
Preset
Press Timer button
and hold 3
seconds to enter preset / appointment
setting mode. Time digit flicking together
with preset logo. Use same way to set
preset time from 30 minutes to 12 hours.
Preset mode only goes with DIY or
Menu. Set DIY or choose Menu firstly. Press
knob after setting then time start to count
down,
Press
preset
to cancel.
SPEED
•
Press this button in stand-by mode or
during working process (except some auto
programs locked the speed adjustment), the
appliance gets into speed setting mode.
The
signal on LCD flicker, then
speed is adjustable. Turn the knob to select
desired speed.
•
Speed range from level 1-10.
•
Press this button in blending & heating
process, if the temperature setting or the
actual temperature is over 60
℃
,the speed
can be only adjustable from speed 1 to 4. If
it was working at high speed, it will drop to
speed 4 automatically.
•
There is a speed transfer on the
structure, so it's normal to hear little noise
before the motor start working, or
transferring the speed between level 5 and
level 6.
•
For crushing or chopping hard food or
big volume of food, it is suggested to select
speed 5 first and then turn to speed 10, to
avoid vibration and achieve perfect
performance.
•
Please do not use speed 8,9,10 over 5
minutes each time; please do not use speed
5,6,7 over 10 minutes each time.
TEMPERATURE
•
Press this button in stand-by mode or
during heating process (except some auto
programs
locked
the
temperature
adjustment), the appliance gets into
