When the ice reach to the max storage capacity, the indicator of this button will flash, and the
machine will stop working. What you need to do is pouring out the ice, if the position of ice is lower
than the position of ice bin full sensor, the machine will restart automatically.
OPERATING INSTRUCTIONS
：
Note: Water reservoir and pipeline should be well cleaned before use.
Step 1. Plug out, and clean the water reservoir by adding water, then take plastic plug away to
drain
out
the
water
from
water
reservoir.
Step 2. Reinstall the plastic plug, and add appropriate clean water. After connecting the power
supply well, press and hold "SELECT" button for 3 seconds to activate pipeline self-clean process.
After cleaning, drain out the water by taking plastic plug away.
Step 3. Open the lid and take out the ice basket to add appropriate water into water reservoir.
Note: The water poured into water reservoir should be lower than the water reservoir’s MAX
position. When water volume goes beyond the max, please open the bottom water drain plug
to drain the spare water out. Then close the transparent lid.
Step 4. Select the desired ice size, the default size of machine is large one.
Note: Please select the (S) when ambient temperature is
below 15°c.When the ambient temperature is higher than
30°C, Large ice cube sizes are recommended.
Note: For the first three cycles, the ice may be small and irregular in size.
Note: When the ice collecting tray is full please remove the
ice
immediately,
Do
not
allow
the
ice
collecting
tray
to
overfill.
CLEANING & USE GUIDANCE
：
1.
Clean the inner liner, ice collecting tray, water box, ice
shovel and evaporator frequently. When cleaning, unplug
the unit and remove the ice cubes. Use a diluted solution
of water and vinegar to clean the inside and the outside
surface of the Ice maker. Do not spray Ice maker with
chemicals or diluted agents such as acids, gasoline or oil.
Rinse thoroughly before starting.
2.
Keep ventilation openings in the appliance enclosure, or
in the built-in structure, clear of obstruction. Do not use
