appendix
file: n:\article\cos14310m5-v1_08hpc-en\20150130_cos14310m5-v1.08hpc-en_instructions_for_use_h-p-cosmos_treadmill.doc
© 2015 h/p/cosmos sports & medical gmbh author: fh email@h-p-cosmos.com created 30.01.2015 printed 30.01.2015 page: 207 of 216
Instruction on maintenance works
13.
Hand over and explain service-box. The manufacture recommends a
service contract through an authorised h/p/cosmos service technician.
Lack of maintenance, poor maintenance or unauthorized
servicing/repairs together with improper or lack of safety checks can
lead to a risk of injury to users or damage to the running machine.
This could also lead to loss of manufacturer’s warranty and/or third
party liability.
14.
Correct adjustment of levelling sockets.
Check weight load on the levelling sockets by trying to lift up the
treadmill frame.
15.
Proper adjustment of running belt with regulation screw and allen key.
For each change of running belt direction there are two adjustment
steps:
a) Turn key at the back of the UserTerminal
b) Adjust regulation screw according to previously defined value.
Pull out allen key!
16.
Lubrication of running belt when "OIL"-message is indicated (quantity,
intervals according to this manual, distribution of oil by "duck-walking").
Use only original h/p/cosmos lubricant authorized for this model of
running machine. Observe additional lubrication requirements.
After running belt lubrication, the position of the running belt must be
checked once more and be adjusted if necessary.
17.
Delete “OIL“-message with option 01.
accomplished
accomplished
accomplished
accomplished
accomplished
