7
BAG REMOVAL & REPLACEMENT
Follow These Steps (refer to figures 1-4)
Make sure the power unit is OFF.
1.
Remove the top cover from power unit by lifting it up.
(Fig.1)
2.
Remove the used filter bag by holding the cardboard header and sliding
it off of the plastic bag adapter.
(Fig.2)
3.
Pull off reorder information and seal the bag opening with adhesive
flap. Discard used bag.
(Fig.3)
4.
Install new bag by folding over the flap, exposing the hole and cardboard
header. Do not remove reorder information from flap until ready for
disposal. Hold cardboard header firmly and push the bag collar onto the
adapter fitting. Re-install top cover.
(Fig.4)
FIG. 3
FIG. 1
FIG. 4
FIG. 2
7
