WINTER TIMBERMAX 4 – 23 ECO
50
14.4
Start and stop of feeding
The start and stop of feeding is interlocked with the start and stop of each spindle. The
feeding only starts when all of the spindles are started. ( Note: if the universal spindle is of no
use, please turn the selection switch SA6 on the control panel to right so that the interlock of
universal spindle is cut, then the feeding can be started.) While the machine is running normally,
stop any of the spindles and the feeding will be stopped.
14.5
Jogging feed and reverse
Only when the feeding is stopped, turn the SA9 switch on the control panel
left or right shortly for jogging feed and reverse. Let go of SA9 to stop jogging
feed or reverse.
14.6
Speed adjustment of inverter
(
please see content 8.15.1
)
14.7
Normal stop and emergency stop
Normal stop: Press “stop feeding” SB7 on the control panel to stop the feeding device, then
stop each spindle and the machine stops.
Emergency stop: Press emergency stop button SB1 on the control panel, and the machine
stops. If the machine needs to be restarted again, first restore the emergency stop butten, then
press the restoration button SB0 on the control panel. When the restoration indicator lights, the
operations for each spindle or feeding can be done accordingly.
14.8
Control for opening the cover
Under stop and running situation, the cover can only be opened by pressing the emergency
stop button SB for about 45 seconds and wait until the safety indicator HL10 lights.
14.9
Control of working lamp
The working lamps are controlled by the selection switche SA5 on the main control panel.
Turn to”1” and the lamps are on, turn to “0” and the lamps are off.