TN-B200CE user manual
2 Megapixel IP Camera Manual
25/73
Live DPC mode/Static DPC mode
Sensors could have defects for something wrong in the process of their storage or manufacturing
process. Such defects are called dead pixels, which consist of two types: static dead pixel and dynamic
dead pixel. The first can be found from the beginning while the second is found over time after using
sensors for a certain period of time. Dynamic dead pixels may not be visible on the screen of ordinary
illumination. However, they can be made visible by amplifying the analog / digital gain. This camera can
correct defects on sensors in two approaches: Live DPC and Static DPC.ging device.
Enhancement
Sharpness
The image will be cleared on edge.
Gamma
RGB Gamma : the image on dark area will be cleared on edge
RGB Gamma + Y Gamma: the image on bright area will be cleared on edge
Hue gain : user can adjust hue gain
Contrast gain : user can adjust contrast gain
LSC Mode
Lens shading compensation can be used to correct the intensity fall-off at the edges of the image sensor
due to the optical lens system.
Codec
Brightness
Controls input video brightness by selecting values between 0 and 255.
Contrast
Controls input video contrast by selecting values between 0 and 255.
Saturation
Controls input video saturation by selecting values between 0 and 255
Noise filter
TDN(2D) : start to work 2D NR at night mode according to TDN (turn on 2D NR)
TDN(3D#1) : start to work 3D#1 NR at night mode according to TDN (refer to 1frames on 3D NR)
TDN(3D#2) : start to work 3D#2 NR at night mode according to TDN (refer to 2frames on 3D NR)
TDN(Strong) : start to work 3D NR at night mode according to TDN (refer to 2frames on 3D NR)
Increase effects than 3 times comparing with normal 3D NR.
TDN(Blend) : start to work 3D NR & 2D NR at night mode according to TDN