TN-B200CE user manual
2 Megapixel IP Camera Manual
31/73
One-way
This IP camera provides two kinds of one-way (unidirectional) streaming based on UTP to clients;
RTSP
and
MPEG-TS
. Both are a kind of broadcasting where traffic from clients to a server is not
generated at all.
RTP (Real-Time Transport Protocol)
is an Internet protocol used for transmitting single real-time
multimedia data such as audio and video to a select group of connected clients. Normally RTSP
uses RTP to format packets of multimedia content.
RTP
menu is used when the RTP only
streaming without RTSP connection. RTP stream will be transmitted to the destination set. The SDP
(Session Description Protocol) file can be found in the server, and a client can retrieve it using http
connection.
Related settings are as follows:
Destination IP :
Set the IP Address of the destination system which will receive RTP Stream.
If the system is a decoder, RTSP authentication information can be in the middle of RTSP URL as
follows;
rtsp://
admin:1234
@192.168.10.100:554/video1
Destination Port :
Set the port of the destination system which will receive TRP stream.
User Name :
Enter the user name that will be used as session name in the SDP file.
