TN-B200CE user manual
2 Megapixel IP Camera Manual
54/73
Continuous
Records continuously
Disconnect
Recording is started when the system loses the connection to its last client(Decoder, VMS/NVR) etc.
When there are
multiple clients and one of the client is disconnected, this doesn’t happen.
Event Type
Records when an event configured in Event Type setting happens.
Disk Information
SD memory can be used, and at least 1GB size is recommended. Either EXT3 or FAT32 file system can
be used. A disk with either EXT3 or FAT32 file system can be read in Linux PC. However, only disk with
FAT32 file system can be read in Windows PC. Less than 4Mbps of video bit rate is recommended when
you record and monitor video simultaneously since frame dropping may happen due to performance
limitation.
Be sure to restart the system after connecting an SD card. During booting, the system reads status
of disk and initializes it. Once the initialization of a disk is finished, the status of disk is shown on
Record
page of web-based setup Refer to the chart for checking the status of disk.