Removing Water:
Removing Tank water.
1. Remove the tank plug.
2. Insert rigid end of siphon into the tank, and flexible hose into a large bucket
. Note
: If the siphon hose hits the impeller blades,
you can rotate the blades slightly by pulling on the rower handle to allow the siphon to reach the bottom of the tank.
3. Drain tank and then refill following directions for tank filling.
Note
: The valve on top of the siphon must be closed to allow proper drainage.
Note
: Water treatment will preclude the need to change tank water if the treatment schedule is maintained. Additional chlorine is required only when discoloration appears
in the water.
Note
: Exposure to sunlight affects the water. Moving the rower away from direct sunlight extend time between water treatments.
9
Summary of Contents for Seattle Wooden Rower
Page 1: ......
Page 17: ...Parts Illustration GR 4000 16 ...