HINTS AND TIPS
- Do not place the appliance on its side or upside down. Pay particular attention to this when the appliance is being moved.
- Ventilation grilles must not be obstructed.
- Do not immerse the appliance in water or other liquids.
- The appliance has internal moving parts.
- Take particular care to prevent children from getting access to or playing with the appliance.
- The ice making element gets very cold and touching it could result in ice burns.
Do not use water that is below 0 degrees or position the appliance in a hot or poorly ventilated environment as this
may cause the ice cubes to be small and ultimately lead to the appliance failure.
- As with all electrical appliances, if used outdoors ensure that it is protected from the elements and use an
earth leakage contact breaker for safety.
- Do not expose the appliance to rain and do not use it or store it where it could get damp or wet.
- Do not put the appliance near heat sources.
- In case of damage to the appliance or its lead we advise not using the appliance and to return it for authorised
repair and parts replacement.
- Using parts not recommended by the manufacturer can be dangerous.
- Only use the appliance for its intended purpose, the production of ice cubes and only use portable mains water
or puri
fi
ed still water. Flavoured water, fruit juice, cordials and similar products must not be used.
- If connected to the mains water supply an
in-line water
fi
lter
should be used to eliminate the build up of water scale
in the working parts of the machine.
- The refrigerant gas used in the appliance (R134a) is chemical waste. Disposal of the appliance must be done in an
environmentally friendly manner.
PROBLEMS AND MALFUNCTIONS
- If the Water Level Low Warning light is illuminated red, the water tank is low and requires topping up.
- If the Ice Cube Basket Full Warning light is illuminated red, the basket requires emptying.
- If the ice cube making process appears to be stopped it may be that ice cubes are stuck in the freezer element, an ice
cube is stuck in the mechanism or the ice cubes have fused into one large block of ice. If this happens press the STOP
button, unplug it from the mains supply, open the cover and leave it open until all ice blockages melt naturally.
Once all the ice has melted close the cover, plug the appliance in to the supply and press START.
6.
