▪
When replacing, the number on the filter label must
match the number on the filter socket.
(E.g. filter label number
1
- filter socket number
1
)
▪ Check that the ▲ position of the filter socket and the
reference point lock shape( ) of the filter are aligned.
▪
Be careful not to change the positions of the two filters.
▪
Please be careful not to use the same filter on both sides
K. How to Replace the Filters
13
Before installing the new filter, be sure to empty all the water inside the product
before replacing it.
1. Shut off the raw water adapter valve.
2. Press the water intake button to empty all filters
and water inside the product, and then unplug
the power plug.
3. Turn the filter case to the right to disassemble it,
and then turn the filter to the right to remove it.
4. Insert the filter to be replaced into the filter
socket and turn it to lock it.
5. Tighten the filter case by turning it to the left.
• Check if water leaks after supplying raw water. If a leak occurs,
immediately turn off the power, close the water supply valve, and
contact H2O LIFE SOURCE technical department.
6. After connecting the power plug, press the water intake
button to dispense water. Remember you
MUST
do flushing
of the new filter(s) for at least 1 to 2 litres of water.
1
2
2
1
