⑧
Button: A button used for Bluetooth pairing
How to Use
1.
[Preparation]
z
Insert batteries.
Open the cell cover to place AAA 1.5V 2 EA while checking the polarity (+,-) and
then close the cover.
z
Connect the cable to a glucometer
2.
[Bluetooth pairing]
Bluetooth pairing is an authentication process between a Bluetooth adapter and a target
device that readings are supposed to be sent to.
There are two pairing modes for the Bluetooth adapter, BA-110.
z
To pair the Bluetooth adapter with a NEW target device.
z
If it fails, the latest pairing info is preserved. And the Bluetooth adapter can send
readings to the latest paired device.
z
If you try to pair with the latest paired device, the Bluetooth adapter considers it as
a failure. This feature may make confusion. So it is strongly recommended not to
pair with already paired device again using this pairing mode.
z
The steps are as follows:
①
Disconnect the glucometer if it is connected to the Bluetooth adapter.
②
Remove batteries.
③
Press the button several times to discharge or wait for a few minutes.
④
After batteries are inserted and the RED LED blinks twice, click the pairing button
on the back
○
8
