3.
Measurement and data transmission
1)
How to use
A.
Take a reading, and then the reading is transmitted to the 3G tele-health modem by
Bluetooth.
B.
And the reading is automatically transmitted to the server via mobile networks.
C.
At server access failure, it tries 9 more times, in total 10 times at most with 1 hour
period until success.
2)
Clock setup
A.
Clock of the 3G tele-health modem is automatically set with 3G connection.
B.
Clocks of measuring devices can be set during communication with the 3G tele-
health modem.
C.
But, regarding the IEM’s blood pressure monitor, clock must be set manually.
3)
LED indications
A.
During Bluetooth communication, the “Readings” LED turns GREEN.
B.
At success, the “Readings” LED blinks GREEN 5 times.
C.
At failure, the “Readings” LED blinks RED 5 times.
D.
During server connections, the “Sending” LED turns GREEN.
E.
At success, the “Sending” LED blinks GREEN 5 times.
F.
At failure, the “Sending” LED blinks RED 5 times.
4)
Notification for power failure
A.
The 3G tele-health modem is supposed to connect to a server when an AC adapter
is connected and disconnected.
B.
It sends “Power up” and “Power down” signals, respectively.
C.
Backup batteries are required.
5)
Heart beat
A.
Server access is taken every six hours for indication “I’m alive.”
B.
If there is any reading unsent, the reading is sent to a server together.
