Available devices
-
Lifescan Onetouch Ultra/Mini with Bluetooth adapter(BA-110,BA-300)
-
Weight : 160g
-
A&D weighting scale (UC-321PBT)
-
A&D blood pressure monitor (UA-767PBT)
-
IEM blood pressure monitor (Stabil-O-Graph)
-
ForaCare’s thermometer (FORA IR20b)
-
Beijing Choice’s Pulse Oximeter (MD300C318)
-
Omron blood pressure monitor (HEM-9200T)
-
Omron weighting scale (HN-290T)
-
Welch Allyn blood pressure monitor (RPM-BP100)
-
Welch Allyn weighting scale (RPM-Scale100)
-
P1ng Pedometer (PB-001)
2. LTE tele-health modem installation
1)
Preparation for deployment
A.
LTE tele-health modem configuration
i.
Turn off the LTE tele-health modem. (Figure 1.)
ii.
Connect a serial cable (provided by H3 System) to a LTE tele-health modem
and a PC.
iii.
Run the configuration software.
iv.
Turn on the LTE tele-health modem.
v.
Configure the LTE tele-health modem with the configuration software. For the
details, please see the section below, “LTE tele-health modem configuration.”
B.
Pairing and testing
i.
Pair with devices. Please see “Pairing” section below. (Figure 2.)
ii.
Take readings and confirm if the readings are successfully delivered to a server.
Please see “Measurement and data transmission” section.
C.
Final inspection
i.
Confirm Simcard Installed
ii.
Prepare dry cells for backup batteries.
iii.
Close the bottom cover.
2)
Installation at user’s home
A.
Place a LTE tele-health modem at a suitable place.
B.
Connect a power adapter.
C.
Insert dry cells if required.
D.
Insert Simcard.
