background image

18

 

 

Warranty

 

H3 Platform offers free 2-year limited warranty service on our products. If the standard warranty period is not enough, H3 Platform offers 

optional purchase extended warranty service coverage that will provide warranty for 1, 2, or 3 additional years.  

Limited Warranty

 

H3 Platform warrants its products against defects in material and workmanship. Under normal use and service, every hardw are portion of the 

products will be free from physical defects in material and workmanship during the warranty period, or the product will be re paired or 

replaced as determined solely by H3 Platform. H3 Platform provides a limited warranty for its products  only to the person or entity that 

originally purchased the product from H3 Platform or its authorized distributor or retailer. H3 Platform's products are PCI s witches, and H3 

Platform makes no warranty of the devices installed, or warranty on compatibility of all PCIe devices. H3 Platform will not be liable in any 

way for the loss of data stored on H3 Platform products and any damage caused by this. 

 

Extra warranty period might be provided by H3 Platform's worldwide dealers/distributors. Please contact dealers/ distributors to purchase 

the extended warranty. 

 

If a product does not operate as warranted above during the applicable warranty period, H3 Platform shall, at its option and  expense (except 

for shipping cost), repair the defective product or part, deliver to the customer an equivalent product or part to replace the defective item. 

All products that are replaced will become the property of H3 Platform. Replacement products may be new or reconditioned.  

Warranty does not apply, if: 

1.

 

The warranty period is expired, 

2.

 

The warranty label is broken or removed, 

3.

 

The serial number label is missing or unrecognizable, 

4.

 

The product has been modified or repaired by any unauthorized service center or personnel.  

5.

 

The defect was subject to abuse, improper use not conforming to product manual instructions, or environment conditions more severe 

than those specified in the manual and specification. 

6.

 

The defect was subject to Force Majeure, such as acts of God, flood, lighting, earthquake, war, vandalism, theft, brownout s or sags 

(damage due to low voltage disturbances) 

7.

 

Consumables, such as batteries 

8.

 

Routine cleaning, or normal cosmetic and mechanical wear 

9.

 

Damage caused by misuse, abuse, or neglect 

10.

 

Damage caused by parts that were not manufactured or sold by H3 Platform 

11.

 

Damage caused by installing devices not on the compatible list 

12.

 

Damage caused when warranted parts were repaired or replaced by an organization other than H3 Platform or by a service provid er 

not authorized by H3 Platform. 

If the customer's product is not covered under warranty, H3 Platform may offer Repair Services under the customer's payment.

 

Summary of Contents for Falcon 4010

























Reviews: