Manual Version:5PW100-20120627
1
H3C ANT-2011P patch antenna installation
guide
Technical specifications
The ANT-2011P patch antenna is designed for use in outdoor environments. It is connected to the
2.4-GHz antenna port on an H3C outdoor AP through an N-type connector.
Figure 1
Antenna view
Table 1
Technical specifications
Antenna type
ANT-2011P
Operating frequency range
2400 MHz to 2500 MHz
Bandwidth 100
MHz
Peak gain
11 dBi
Front and Back Ratio
≥
25 dB
Horizontal beamwidth
90 degrees
Vertical beamwidth
30 degrees
Voltage standing wave ratio (VSWR)
≤
1.5
Impedance 50
Ω
Polarization type
Vertical
Max. power
100 W
