6
Figure 5
Attaching the L-mounting bracket to the antenna
3.
To mount the antenna on a mast, perform the following steps:
a.
Place the mast-mount clamp against L-mounting bracket and align the installation holes. Place
the U-bolt around the mast, and pass the U-bolt through the installation holes in the mast-mount
clamp.
b.
Attach a flat washer, a spring washer, and an M6 hex nut in sequence on each end of the
U-bolt. Fasten the M6 hex nuts.
c.
Make sure the polarization arrow on the antenna points up.
Figure 6
Mounting the antenna on a mast
(1) Antenna
(2) Mast
(3) Polarization arrow
(4) L-mounting bracket
(5) Mast-mount clamp
(6) U-bolt
4.
To change the orientation of the antenna, use either of the following methods:
