Manual Version:5PW100-20120627
5
•
One electric drill and associated drill bits
Mounting the antenna on a ceiling
To mount the antenna on a ceiling:
1.
Drill an 18 mm (0.71 in) diameter hole in the ceiling where you want to mount the antenna. See
callout 5 in
.
2.
Remove the flat washer (callout 3 in
) from the antenna and place it above the ceiling.
3.
Thread the antenna cable through the hole you drilled in Step 1 until the base of the antenna is
flush with the ceiling.
4.
From above the ceiling, thread the antenna cable through the opening on the split flat washer.
See
.
5.
Thread the split flat washer through the antenna’s thread and fasten it until the antenna is secured
in place.
Figure 6
Threading the antenna cable through the split flat washer
