3
•
H3C UniServer BX1010E
•
H3C UniServer BT616E
•
H3C UniServer BT1004E
Network adapter and ICM interconnection
Network adapters connect to ICMs through the mid plane. The mapping relations between a network
adapter and ICMs depend on the blade server on which the network adapter resides. For installation
locations of ICMs, see
For network adapters installed in a 2-processor half-width or full-width blade server, their mapping
relations with ICMs are as shown in
•
Network adapter in Mezz1 is connected to ICMs in slots 1 and 4.
•
Network adapter in Mezz2 is connected to ICMs in slots 2 and 5.
•
Network adapter in Mezz3 is connected to ICMs in slots 3 and 6.
Figure 77 Network adapter and ICM mapping relations (2-processor half-width or full-width
blade server)
For network adapters installed in a 4-processor full-width blade server, their mapping relations with
ICMs are as shown in
•
Network adapters in Mezz1 and Mezz4 are connected to ICMs in slots 1 and 4.
•
Network adapters in Mezz2 and Mezz5 are connected to ICMs in slots 2 and 5.
•
Network adapters in Mezz3 and Mezz6 are connected to ICMs in slots 3 and 6.
Mezz1
Mezz2
Mezz3
1
2
LOM P1
LOM P2
2
3
1
6
5
4
Blade
ICM
Mid-plane
Embedded
OM