1-18
Hot Swappable Power Module Status LEDs
The hot swappable power module status LEDs help you determine the working status of a hot
swappable power module. Refer to
Table 1-9
for details.
Table 1-9
Description of the hot swappable power module LEDs
LED
Status
Description
Steady green
Hot swappable power module slot 1 is installed with a power
module, and the power output is normal.
Steady yellow
Hot swappable power module slot 1 is installed with a power
module, but an output failure occurs.
PWR1
Off
No power module is installed in hot swappable power
module slot 1, or no power is input.
Steady green
Hot swappable power module slot 2 is installed with a power
module, and the power output is normal.
Steady yellow
Hot swappable power module slot 2 is installed with a power
module, but an output failure occurs.
PWR2
Off
No power module is installed in hot swappable power
module slot 2, or no power is input.
RPS Status LED
The RPS status LED helps you determine the working status of the RPS of the switch.
For the RPS status LED on an S5800-32C and S5800-56C, refer to
Table 1-10
for details.
For the RPS status LED on an S5800-32C-PWR and S5800-56C-PWR, refer to
Table 1-11
for details.
Table 1-10
Description of the RPS status LED on an S5800-32C and S5800-56C
LED
Status
Description
Steady green
Power input on the RPS interface is normal or the RPS is in
position, and AC input on the AC power interface is normal.
Steady yellow
Power input on the RPS interface is normal, but AC input
fails or AC input is not connected.
RPS
Off
RPS interface is not connected.
Table 1-11
Description of the RPS status LED on an S5800-32C-PWR and S5800-56C-PWR
LED
Status
Description
Steady green
Power input on the RPS interface and AC input on the AC
power interface are normal.
Steady yellow
Power input on the RPS interface is normal, but AC input
fails or AC input is not connected.
RPS
Off
Power input on the RPS interface is abnormal.
