Command Manual – DNS
H3C S7500E Series Ethernet Switches
Chapter 1 DNS Configuration Commands
1-8
Use the
undo dns server
to remove DNS server(s).
No DNS server is specified by default.
You can configure a maximum of six DNS servers.
Related commands:
display dns server
.
Examples
# Specify the DNS server 172.16.1.1.
[Sysname] dns server 172.16.1.1
1.1.10 ip host
Syntax
ip host
hostname
ip-address
undo ip host
hostname
[
ip-address
]
View
System view
Parameters
Hostname
: Host name, consisting of 1 to 20 characters, including case-insensitive
letters, numbers, hyphens (-), or dots (.). The host name must include at least one
letter.
ip-address
: IP address of the specified host in dotted decimal notation.
Description
Use the
ip host
command to create a host name to IP address mapping in the static
resolution table.
Use the
undo ip host
command to remove a mapping.
No mappings are created by default.
You can configure only one mapping for a host name. A mapping newly configured for
the host name will overwrite the previous one if there is any.
Related commands:
display ip host
.
Examples
# Map the IP address 10.110.0.1 to the host name aaa.
[Sysname] ip host aaa 10.110.0.1