Command Manual – PoE
H3C S7500E Series Ethernet Switches
Chapter 1 PoE Configuration Commands
1-1
Chapter 1 PoE Configuration Commands
1.1 PoE Configuration Commands
1.1.1 apply poe-profile
Syntax
apply poe-profile
{
index index
|
name profile-name
}
undo apply poe-profile
{
index index
|
name profile-name
}
View
PoE interface view
Parameters
index index
: Index number of the PoE configuration file, in the range 1 to 100.
name profile-name
: Name of the PoE configuration file, a string of 1 to 15 characters.
Description
Use the
apply poe-profile
command to apply the PoE configuration file to the current
PoE interface.
Use the
undo apply poe-profile
command to remove the application of the PoE
configuration file to the current PoE interface.
Note that the index number, instead of the name, of the PoE configuration file is
displayed when you execute the
display this
command.
Related commands:
display poe-profile
,
apply poe-profile interface
.
Examples
# Apply the PoE configuration file named
A20
to the PoE interface Ethernet 2/0/2.
<Sysname> system-view
[Sysname] interface Ethernet 2/0/2
[Sysname-Ethernet2/0/2] apply poe-profile name A20
[Sysname-Ethernet2/0/2] display this
#
interface Ethernet2/0/2
apply poe-profile index 1
#
