Command Manual – Port Correlation Configuration
H3C S7500E Series Ethernet Switches
Chapter 1 Ethernet Port Configuration
Commands
1-30
1.1.30 storm-constrain interval
Syntax
storm-constrain interval
seconds
undo storm-constrain interval
View
System view
Parameters
Seconds
: Interval for generating traffic statistics, in the range 1 to 300 (in seconds).
Description
Use the
storm-constrain interval
command to set the interval for generating traffic
statistics.
Use the
undo storm-constrain interval
command to restore the default.
By default, the interval for generating traffic statistics is 10 seconds.
Note:
z
The interval set by the
storm-constrain interval
command is specifically for the
storm constrain function. It is different form that set by the
flow-interval
command.
z
For network stability consideration, configure the interval for generating traffic
statistics to a value that is not shorter than the default.
Examples
# Set the interval for generating traffic statistics to 60 seconds.
<Sysname> system-view
[Sysname] storm-constrain interval 60
1.1.31 unicast-suppression
Syntax
unicast-suppression
{
ratio | pps max-pps
}
undo
unicast-suppression
View
Ethernet port view, port group view
