Command Manual – IP Routing Overview
H3C S7500E Series Ethernet Switches
Chapter 1 Routing Overview Commands
1-2
Table 1-1
Description on the fields of the
display ip relay-route
command
Field
Description
Total Number of Relay-route
Total number of recursive routes
Dest/Mask Destination
address/mask of the recursive route
Related instance id(s)
The number in the parentheses after each
instance ID indicates the number of routes that
have used the recursive route in the routing table
corresponding to the instance ID.
1.1.2 display ip relay-tunnel
Syntax
display ip relay-tunnel
View
Any view
Parameters
None
Description
Use the
display ip relay-tunnel
command to display recursive tunnel information.
Examples
# Display recursive tunnel information.
<Sysname> display ip relay-tunnel
Total Number of Relay-tunnel is: 1.
Dest/Mask: 40.40.40.40/255.255.255.255
Related instance id(s): 1(1) 2(1) 3(1) 4(1)
Table 1-2 display ip relay-tunnel
command output description
Field
Description
Total Number of Relay-tunnel
Total number of recursive tunnels
Dest/Mask Destination
address/mask of the recursive tunnel
Related instance id(s)
The number in the parentheses after each
instance ID indicates the number of routes that
have used the recursive tunnel in the routing table
corresponding to the instance ID.
