Command Manual – IPv4 Routing
H3C S7500E Series Ethernet Switches
Chapter 5 BGP Configuration Commands
5-1
Chapter 5 BGP Configuration Commands
Note:
The term “router” in this document refers to a generic router or an Ethernet switch
running routing protocols.
5.1 BGP Configuration Commands
Note:
For routing policy configuration commands, refer to
Routing Policy Commands
.
5.1.1 aggregate
Syntax
aggregate
ip-address
{
mask
|
mask-length
}
[
as-set
|
attribute-policy
route-policy-name
|
detail-suppressed
|
origin-policy
route-policy-name
|
suppress-policy
route-policy-name
] *
undo aggregate
ip-address
{
mask
|
mask-length
}
View
BGP view
Parameters
ip-address
: Summary address.
mask
: Summary mask, in dotted decimal notation.
mask-length
: Summary mask length, in the range 0 to 32.
as-set
: Creates a summary with AS set.
attribute-policy
route-policy-name:
Sets the attributes of the summary route according
to the routing policy, the name of which is a string of 1 to 19 characters.
detail-suppressed
: Only advertises the summary route.
