Command Manual – IPv6 Routing
H3C S7500E Series Ethernet Switches
Chapter 3 IPv6 OSPFv3 Configuration Commands
3-20
Description
Use the
display ospfv3 routing
command to display OSPFv3 routing table
information.
If no process is specified, routing table information of all OSPFv3 processes is
displayed.
Examples
# Display OSPFv3 routing table information.
<Sysname> display ospfv3 routing
E1 - Type 1 external route, IA - Inter area route, I - Intra area route
E2 - Type 2 external route, * - Seleted route
OSPFv3 Router with ID (1.1.1.1) (Process 1)
------------------------------------------------------------------------
*Destination: 2001::/64
Type : I Cost : 1
NextHop : directly-connected Interface: Vlan100
Table 3-14
Description on the fields of the
display ospfv3 routing
command
Field
Description
Destination Destination
network
segment
Type Route
type
Cost Route
cost
value
Next-hop
Next hop address
Interface Outbound
interface
# Display the statistics of OSPFv3 routing table.
<Sysname> display ospfv3 routing statistics
OSPFv3 Router with ID (3.3.3.3) (Process 1)
OSPFv3 Routing Statistics
Intra-area-routes : 1
Inter-area-routes : 1
External-routes : 0