Command Manual – IPv6 Configuration
H3C S7500E Series Ethernet Switches
Chapter 1 IPv6 Basics Configuration Commands
1-8
Parameters
ipv6-address
: IPv6 address whose neighbor information is to be displayed.
all
: Displays information of all neighbors, including neighbors acquired dynamically and
configured statically.
dynamic
: Displays information of all neighbors acquired dynamically.
static
: Displays information of all neighbors configured statically.
slot slot-number
: Displays information of the neighbors of a specified slot.
interface interface-type interface-number
: Displays information of the neighbors of a
specified interface.
vlan
vlan-id
: Displays information of the neighbors of a specified VLAN whose ID
ranges from 1 to 4094.
|
: Filters the output information.
begin
: Displays the neighbor entries from the first one containing the specified
character string.
include
: Displays the neighbor entries containing the specified character string.
exclude
: Displays the neighbor entries without the specified character string.
text
: Character string.
Description
Use the
display ipv6 neighbors
command to display neighbor information.
Examples
# Display all neighbor information.
<Sysname> display ipv6 neighbors all
Type: S-Static D-Dynamic
IPv6 Address Link-layer VID Interface State T Age
FE80::200:5EFF:FE32:B800 0000-5e32-b800 1 Eth3/0/3 REACH S -
Table 1-7
Description on fields of the
display ipv6 neighbors
command
Field
Description
IPv6 Address
IPv6 address of a neighbor
Link-layer
Link layer address (MAC address of a neighbor)
VID
VLAN to which the interface connected with a neighbor
belongs
Interface
Interface connected with a neighbor
