Command Manual – Multicast
H3C S7500E Series Ethernet Switches
Chapter 4 PIM Configuration Commands
4-2
4.1.2 bsr-policy
Syntax
bsr-policy acl-number
undo bsr-policy
View
PIM view
Parameters
acl-number
: Basic ACL number, in the range of 2000 to 2999. When an ACL is defined,
the
source
keyword in the
rule
command specifies a legal BSR source address range.
Description
Use the
bsr-policy
command to configure a legal BSR address range to guard against
BSR spoofing.
Use the
undo bsr-policy
command to remove the restriction of the BSR address
range.
By default, there are no restrictions on the BSR address range, namely all the received
BSR messages are regarded to be valid.
Examples
# Configure a legal BSR address range so that only routers on the segment 10.1.1.0/24
can become the BSR.
<Sysname> system-view
[Sysname] acl number 2000
[Sysname-acl-basic-2000] rule permit source 10.1.1.0 0.0.0.255
[Sysname-acl-basic-2000] quit
[Sysname] pim
[Sysname-pim] bsr-policy 2000
4.1.3 c-bsr
Syntax
c-bsr interface-type interface-number
[
hash-length
[
priority
] ]
undo c-bsr
View
PIM view