Command Manual – Multicast
H3C S7500E Series Ethernet Switches
Chapter 4 PIM Configuration Commands
4-15
Referenced route type: unicast (direct)
RPF-route selecting rule: preference-preferred
The (S,G) or (*,G) list dependent on this route entry
(172.168.0.12, 227.0.0.1)
Table 4-2
Description on the fields of the
display pim claimed-route
command
Field
Description
RPF interface:
RPF interface type and number
RPF neighbor:
IP address of the RPF neighbor
Referenced route/mask:
Address/mask of the referenced route
Referenced route type:
Type of the referenced route
RPF-route selecting rule:
Rule of RPF route selection
The (S,G) or (*,G) list dependent on this
route entry
(S, G) or (*, G) entries using this route
4.1.17 display pim control-message counters
Syntax
display pim control-message counters
[
message-type
{
probe
|
register
|
register-stop
} | [
interface interface-type interface-number
|
message-type
{
assert
|
bsr
|
crp
|
graft
|
graft-ack
|
hello
|
join-prune
|
state-refresh
} ] * ]
View
Any view
Parameters
probe
: Displays the number of null register messages.
register
: Displays the number of register messages.
register-stop
: Displays the number of register-stop messages.
interface interface-type
interface-number
: Displays the number of PIM control
messages on the specified interface.
assert
: Displays the number of assert messages.
bsr
: Displays the number of Bootstrap messages.
crp
: Displays the number of C-RP-Adv messages.
graft
: Displays the number of Graft messages.
graft-ack
: Displays the number of Graft-ack messages.
hello
: Displays the number of Hello messages.
