Command Manual – AAA RADIUS HWTACACS
H3C S7500E Series Ethernet Switches
Chapter 1 AAA/RADIUS/HWTACACS
Configuration Commands
1-56
NAS buffers and resends the packet until it receives a response or the number of
transmission retries reaches the configured limit. In the latter case, the NAS discards
the packet.
Related commands:
reset stop-accounting-buffer
,
radius scheme
,
display
stop-accounting-buffer
.
Examples
# In RADIUS scheme radius1, enable the device to buffer the stop-accounting requests
getting no responses.
<Sysname> system-view
[Sysname] radius scheme radius1
[Sysname-radius-radius1] stop-accounting-buffer enable
1.2.24 timer quiet
Syntax
timer quiet minutes
undo timer quiet
View
RADIUS scheme view
Parameters
minutes
: Primary server quiet period, in minutes. It ranges from 1 to 255 and defaults to
5.
Description
Use the
timer quiet
command to set the quiet timer for the primary server, that is, the
duration that the status of the primary server stays blocked before resuming the active
state.
Use the
undo timer quiet
command to restore the default.
Related commands:
display radius scheme
.
Examples
# Set the quiet timer for the primary server to 10 minutes.
<Sysname> system-view
[Sysname] radius scheme test1
[Sysname-radius-test1] timer quiet 10
