Command Manual – Portal
H3C S7500E Series Ethernet Switches
Chapter 1 Portal Configuration Commands
1-7
Field
Description
Destination Destination
information in the portal-free rule
IP
Destination IP address in the portal-free rule
Mask
Subnet mask of the destination IP address in the portal-free rule
1.1.4 display portal interface
Syntax
display portal interface interface-type interface-number
View
Any view
Parameters
interface-type interface-number
: Specifies an interface by its type and number.
Description
Use the
display portal interface
command to display the portal configuration of an
interface.
Examples
# Display the portal configuration of interface Vlan-interface 2.
<Sysname> display portal interface Vlan-interface 2
Interface portal configuration:
Vlan-interface 2: Portal running
Portal server: servername
Authentication type: Direct
Authentication network:
address = 0.0.0.0 mask = 0.0.0.0
Table 1-4
Description on the fields of the
display portal interface
command
Field
Description
Interface portal configuration
Portal configuration on the interface
Vlan-interface 2
Status of the portal feature on the interface
Portal server
Portal server referenced by the interface
Authentication type
Authentication mode enabled on the interface
Authentication network
Information of the portal authentication subnet
address
IP address of the portal authentication subnet