Installation Manual
H3C SecPath F1000-A Firewall
Chapter 1 Product Overview
1-6
Description
Attribute
Multi-mo
de
short-ha
ul (850
nm)
Single
mode
medium-ha
ul (1310
nm)
Single
mode
short-haul
(1310 nm)
Single
mode
long-haul
(1550 nm)
Single
mode
ultra-long
haul (1550
nm)
Central
wavelength
850 nm
1310 nm
1310 nm
1550 nm
1550 nm
Min -9.5 dBm
-9 dBm
-2 dBm
-4 dBm
-4 dBm
Transmi
tter
optical
power
Max 0 dBm
-3 dBm
5 dBm
1 dBm
2 dBm
Receiver
sensitivity
-17 dBm
-20 dBm
-23 dBm
-21 dBm
-22 dBm
Operating
mode
1000 Mbps
Full duplex
Frame format
Ethernet_II
Ethernet_SNAP
Note:
z
When using optical transceivers, select those that have been approved by our
company.
z
Before performing switchover between electrical/optical interfaces, you need to first
disable the rate and duplex mode configurations in the current mode (electrical or
optical), and then configure the interface after the switchover.
1.2.5 MIM
The H3C SecPath F1000-A provides one extended MIM slot where one of the following
MIMs can be installed:
z
1-port 10Base-T/100Base-TX Fast Ethernet interface module (1FE)
z
2-port 10Base-T/100Base-TX Fast Ethernet interface module (2FE)
z
4-port 10Base-T/100Base-TX Fast Ethernet interface module (4FE)
z
1-port 10Base-T/100Base-T/1000Base-TX Ethernet interface module (1GBE)
z
2-port 10Base-T/100Base-T/1000Base-TX Ethernet interface module (2GBE)
z
1-port 1000Base-LX/1000Base-SX optical interface module (1GEF)
z
2-port 1000Base-LX/1000Base-SX optical interface module (2GEF)
z
Security socket layer encryption module (SSL)
For more information on the MIMs, see Chapter 8 “Multifunctional Interface Module”.
