Installation Manual
H3C SecPath F1000-A Firewall
Chapter 5 Software Maintenance
5-12
local file
remote file
Upon the completion of uploading, the prompt “ftp>” appears again. Enter
dir
to view
the name and size of the uploaded file on the firewall. It has the same size as the
original file on the host if the uploading is successful.
Caution:
z
When using FTP to upgrade the application program, make sure that the firewall
has enough flash memory. If the memory is not enough, you need to use the delete
/unreserved command to permanently delete old version files or other files to save
the memory space; otherwise, new files cannot be uploaded.
z
The Boot ROM upgrade is not complete after the Boot ROM program is uploaded
using the
put
command. To complete the upgrade, use the
upgrade
bootrom
[
full
]
command to decompress the bootrom/bootromfull program from the root directory
in the Flash and write it to the Boot ROM. After that you have completed the upgrade
of Boot ROM.
z
After uploading the application program into the flash memory, you need to rename
the program file to “system” to make the program take effect at next startup.
z
After uploading configuration files into the flash memory, you need to rename the file
to “config.cfg” to make the files take effect at next startup of the system, or use the
startup saved-configuration
command to set the configuration files used for next
startup.
z
Download an application program/configuration file
ftp> get
remote file
local file
Step 4: Upon the completion of the uploading/downloading, quit the FTP client
program.
ftp>quit
IV. Detaching the Web file
When the downloading using FTP is completed, the Web file is included in the
application program. You need to detach it from the application program using the
detach
command.
<VPN Gateway> detach system
System file length 7856557 bytes, http file length 834724 bytes.
<VPN Gateway> dir
