Installation Manual
H3C SecPath F1000-A Firewall
Chapter 5 Software Maintenance
5-13
Directory of flash:/
0 -rw- 8691281 Jun 16 2009 06:46:36 system
1 -rw- 1830 Jun 17 2009 07:47:16 config.cfg
2 -rw- 834724 Jun 18 2009 02:22:39 http.zip
If the Web file is not included, the system gives the corresponding prompt. The Web file
name defaults to http.zip.
5.1.6 Modifying Boot ROM Password
You can use the Boot menu of the firewall to change the Boot ROM password.
Start the firewall. When “System starts booting” appears on the configuration terminal,
press <Ctrl+D>, and then the system prompts:
Please input Boot ROM password :
Caution:
z
To enter the Boot menu, you must press <Ctrl+D> within three seconds after the
“System starts booting” prompt appears on the configuration terminal; otherwise,
the system starts decompressing the program.
z
You need to restart the firewall if you want to enter the Loader menu after entering
the Boot ROM extended segment.
After entering the correct password, press <Enter>to enter the Boot menu (press
<Enter> directly if the password is not set), and the system displays the information as
follows:
Boot Menu:
1: Download Boot ROM with XModem
2: Download Extended Segment of Boot ROM with XModem
3: Modify Boot ROM password
4: System booting from Flash
5: Do not check the version of Extended Segment of Boot ROM
6: Exit and reboot
Enter your choice(1-6):
Following is the description on the options of Boot menu:
z
1: Download Boot ROM with XModem
z
2: Upgrade the extended segment of Boot ROM with XModem
z
3: Modify Boot ROM password