2-4
Figure2-3 ICG2000D/2000D-EI device dimensions
Table2-1 Device dimensions and rack requirements
Device model
Chassis dimensions
Rack requirements
ICG2000D/2000D
-EI
•
Height
—44.2 mm (1.74 in)/1 RU
•
Width
—360 mm (14.17 in)
•
Depth
—420 mm (16.54 in)
300 mm (11.81 in) for the
chassis
60 mm (2.36 in) for connecting
the AC power cord at the front
60 mm (2.36 in) for connecting
the E1 cable at the rear
•
A minimum of 0.6 m (1.97 ft) in
depth (recommended)
•
A minimum of 80 mm (3.15 in)
between the front rack posts and the
front door
•
A minimum of 360 mm (14.17 in)
between the front rack posts and the
rear door
Installing the device in a rack
CAUTION:
The mounting brackets can support only the weight of the device. Do not place objects on the
device.
To install the device in a rack:
1.
Use a mounting bracket to mark the cage nut installation holes in the front rack posts.
Make sure the cage nut installation holes on the front rack posts are on a horizontal line.
2.
Install cage nuts.
60mm
(2.36 in)
300mm
(11.81 in)
60mm
(2.36 in)
Front mounting brackets
Power cord
E1 cable
