background image

About This Manual 

Organization 

H3C OAP Cards User Manual

 is organized as follows:

 

Chapter 

Contents 

1 Overview 

Introduces the functions of the H3C OAP cards, including 
firewall card, IPS card, and access controller module. 

2 Hardware of the OAP Card 

Introduces the hardware characteristics and technical 
specifications of OAP cards. 

3 Installing an OAP Card 

Introduces the procedures to install an OAP card on a switch, 
and the installation precautions. 

 

Conventions 

The manual uses the following conventions:  

Convention 

Description 

 

Means reader be extremely careful. Improper operation may cause 
bodily injury.  

 

Means reader be careful. Improper operation may cause data loss or 
damage to equipment.  

 

Means a complementary description.  

 

Obtaining Documentation and Technical Support 

To obtain up-to-date documentation and technical support, go to 

http://www.h3c.com

 and select your 

country or region. Depending on your selection, you will be redirected to either of the following websites:  

At http://www.h3c.com 

Documentation 

To access the most up-to-date H3C product documentation, go to the H3C website at 

Technical Support 

service@h3c.com 

http://www.h3c.com 

Documentation Feedback 

You can e-mail your comments about product documentation to info@h3c.com.  

We appreciate your comments. 

Environmental Protection

 

This product has been designed to comply with the requirements on environmental protection. For the 
proper storage, use and disposal of this product, national laws and regulations must be observed. 

Summary of Contents for LSWM1FW10













Reviews: