Manual Version
: 5W100-20090929
5 Upgrading the LSWM1WCM10
The LSWM1WCM10 has its own Boot ROM program and application program with a Boot ROM
menu different from that of the S5800-60C-PWR and S5820X-28C series switches. To update the
application program of the LSWM1WCM10, use one of the following ways:
(1)
Local update through the Boot ROM menu
Use the TFTP protocol through the 10/100/1000Base-TX Ethernet port of the LSWM1WCM10
Use the FTP protocol through the 10/100/1000Base-TX Ethernet port of the LSWM1WCM10
(1)
Remote update through CLI
Use the FTP protocol through the Ethernet port of the switch where the LSWM1WCM10 resides
Use the TFTP protocol through the Ethernet port of the switch where the LSWM1WCM10
resides
For how to upgrade the LSWM1WCM10, refer to
H3C Access Controller Module
Software
Maintenance Manual.
6 Logging In to the LSWM1WCM10
Using the following command on a switch, you can to log in to the software system of the
LSWM1WCM10 (OAP card), and the switch’s command line interface (CLI) will switch to the software
system operating interface of the LSWM1WCM10. Thus, you can manage the application software of
LSWM1WCM10 on the switch.
Press the shortcut key
Ctrl + K
to return to the CLI of the switch.
Table4
Log in to the software system of the LSWM1WCM10 from a switch
To do…
Use the command…
Remarks
Log in to the software system of the
LSWM1WCM10 from a switch
mcms connect
slot
slot-number
system
system-name
Required
Available in user view.
Besides the above-mentioned OAP login method, you can log in to the LSWM1WCM10 through
telent, web page, or NMS. For details, refer to the
Login Volume
of the
H3C WX Series Access
Controllers User Manual
.
7 Guidelines
If the host software version does not match the access controller module, contact the sales
agent or the integrator for the right version.
ix
