4
NOTE:
Mounting brackets are used only for securing the switch to the
rack. A rack shelf on the rack is required to bear the switch
weight.
Mounting on a workbench
1.
Verify that the workbench is clean, sturdy, and reliably
grounded.
2.
Place the switch bottom up, and clean the four recessed areas
in the chassis bottom with a soft and dry cloth.
3.
Attach the rubber feet to the recessed areas.
4.
Place the switch upside up on the workbench.
Mounting on a wall
You can use pan-head screws and the mounting holes in the switch
bottom to mount the switch on a wall.
No screws and screw anchors are provided with the switch. Prepare
them yourself. The following figure shows the screw and screw
anchor of the recommended size.
