background image

3Com Corporation
350 Campus Drive
Marlborough, MA
USA 01752-3064

Copyright © 2007, 3Com Corporation. All rights reserved. No part of this documentation may be reproduced in any form or 
by any means or used to make any derivative work (such as translation, transformation, or adaptation) without written 
permission from 3Com Corporation.

3Com Corporation reserves the right to revise this documentation and to make changes in content from time to time 
without obligation on the part of 3Com Corporation to provide notification of such revision or change.

3Com Corporation provides this documentation without warranty, term, or condition of any kind, either implied or 
expressed, including, but not limited to, the implied warranties, terms or conditions of merchantability, satisfactory quality, 
and fitness for a particular purpose. 3Com may make improvements or changes in the product(s) and/or the program(s) 
described in this documentation at any time.

If there is any software on removable media described in this documentation, it is furnished under a license agreement 
included with the product as a separate document, in the hard copy documentation, or on the removable media in a 
directory file named LICENSE.TXT or !LICENSE.TXT. If you are unable to locate a copy, please contact 3Com and a copy will 
be provided to you.

UNITED STATES GOVERNMENT LEGEND

If you are a United States government agency, then this documentation and the software described herein are provided to 
you subject to the following: 

All technical data and computer software are commercial in nature and developed solely at private expense. Software is 
delivered as “Commercial Computer Software” as defined in DFARS 252.227-7014 (June 1995) or as a “commercial item” 
as defined in FAR 2.101(a) and as such is provided with only such rights as are provided in 3Com’s standard commercial 
license for the Software. Technical data is provided with limited rights only as provided in DFAR 252.227-7015 (Nov 1995) or 
FAR 52.227-14 (June 1987), whichever is applicable. You agree not to remove or deface any portion of any legend provided 
on any licensed program or documentation contained in, or delivered to you in conjunction with, this User Guide.

Unless otherwise indicated, 3Com registered trademarks are registered in the United States and may or may not be 
registered in other countries.

3Com and the 3Com logo are registered trademarks of 3Com Corporation.

H3C, 

 , Aolynk, 

 , H3Care, 

 , TOP G, 

 , IRF, NetPilot, Neocean, NeoVTL, SecPro, 

SecPoint, SecEngine, SecPath, Comware, Secware, Storware, NQA, VVG, V2G, VnG, PSPT, XGbus, N-Bus, TiGem, InnoVision 
and HUASAN are trademarks of Hangzhou H3C Technologies Co., Ltd., a 3Com company.

All other trademarks that may be mentioned in this manual are the property of their respective owners.

ENVIRONMENTAL STATEMENT

It is the policy of 3Com Corporation to be environmentally-friendly in all operations. To uphold our policy, we are committed 
to:

Establishing environmental performance standards that comply with national legislation and regulations.

Conserving energy, materials and natural resources in all operations.

Reducing the waste generated by all operations. Ensuring that all waste conforms to recognized environmental standards. 
Maximizing the recyclable and reusable content of all products.

Ensuring that all products can be recycled, reused and disposed of safely.

Ensuring that all products are labelled according to recognized environmental standards.

Improving our environmental record on a continual basis.

End of Life Statement

3Com processes allow for the recovery, reclamation and safe disposal of all end-of-life electronic components.

Regulated Materials Statement

3Com products do not contain any hazardous or ozone-depleting material.

Environmental Statement about the Documentation

The documentation for this product is printed on paper that comes from sustainable, managed forests; it is fully 
biodegradable and recyclable, and is completely chlorine-free. The varnish is environmentally-friendly, and the inks are 
vegetable-based with a low heavy-metal content.

 

Summary of Contents for MSR 20-20





























































Reviews: