Upgrading Application Program Through Ethernet Interface
49
the address of application program. You need to set user name and password if
FTP server is used.
c
CAUTION:
No TFTP/FTP Server is available with the H3C MSR 50 series. You must
install one yourself.
Step 2: Modify Ethernet parameters. Refer to “Configuring Ethernet Parameters”
on page 47 for details.
Step 3: Enter <3> to enter Ethernet submenu. For example, when upgrading main
application program, enter <2> to upgrade:
Loading...
Done!
14323376 bytes downloaded.
Input the File Name:
After the download is done, input the file name and begin to update:
Updating File main.bin........
Update Success!
Step 4: Enter <6> to exit to the main BootROM menu. Enter <1> to boot from the
CF card.
Step 5: Set the updated application program to be the main boot file, i.e. the
default boot file of the system.
Application program does not exist.
Now starting to download application program.
===================<EXTEND-BOOTROM MENU>=====================
| <1> Boot From CF Card
|
| <2> Enter Serial SubMenu
|
| <3> Enter Ethernet SubMenu
|
| <4> File Control
|
| <5> Modify Bootrom Password
|
| <6> Ignore System Configuration
|
| <7> Boot Rom Operation Menu
|
| <8> Clear Super Password
|
| <9> Device Operation
|
| <a> Reboot
|
=============================================================
Enter your choice(1-a):4
The system reboots. Enter <4> when it prompts the above information.
========================<File CONTROL>=======================
|Note:the operating device is CF Card
|
| <1> Display All File
|
| <2> Set Application
File type
|
| <3> Set Configuration File type
|
| <4> Delete File
|
| <5> Exit To Main Menu
|
=============================================================
Enter your choice(1-5):2
Enter the file control submenu and enter <2> to set the application file type.
Summary of Contents for MSR 20-20
Page 4: ......
Page 8: ...8 CHAPTER 1 INTRODUCTION...
Page 28: ...28 CHAPTER 2 FEATURE DESCRIPTION...
Page 34: ...34 CHAPTER 3 LOGGING ONTO MSR SERIES ROUTERS...
