99
Examples
# Display detailed link aggregation information for Ethernet 1/1, a member port of a static
aggregation group.
<Sysname> display link-aggregation member-port ethernet 1/1
Flags: A -- LACP_Activity, B -- LACP_Timeout, C -- Aggregation,
D -- Synchronization, E -- Collecting, F -- Distributing,
G -- Defaulted, H -- Expired
Ethernet1/1:
Aggregation Interface: Bridge-Aggregation1
Port Number: 1
Port Priority: 32768
Oper-Key: 1
# Display detailed link aggregation information for Ethernet 1/2, a member port of a dynamic
aggregation group.
<Sysname> display link-aggregation member-port ethernet 1/2
Flags: A -- LACP_Activity, B -- LACP_Timeout, C -- Aggregation,
D -- Synchronization, E -- Collecting, F -- Distributing,
G -- Defaulted, H -- Expired
Ethernet1/2:
Aggregation Interface: Bridge-Aggregation10
Local:
Port Number: 2
Port Priority: 32768
Oper-Key: 2
Flag: {ACDEF}
Remote:
System ID: 0x8000, 000f-e267-6c6a
Port Number: 26
Port Priority: 32768
Oper-Key: 2
Flag: {ACDEF}
Received LACP Packets: 5 packet(s)
Illegal: 0 packet(s)
Sent LACP Packets: 7 packet(s)
Table 23 Command output
Field Description
Flags
LACP state flags:
•
A
—LACP is enabled.
•
B
—LACP short timeout.
•
C
—The sending system detects that the link is aggregatable.
•
D
—The sending system detects that the link is synchronized.
•
E
—The sending system detects that the incoming frames are collected.
•
F
—The sending system detects that the outgoing frames are distributed.
