101
Aggregation Mode: S -- Static, D -- Dynamic
Loadsharing Type: Shar -- Loadsharing, NonS -- Non-Loadsharing
Actor System ID: 0x8000, 000f-e267-6c6a
AGG AGG Partner ID Select Unselect Share
Interface Mode Ports Ports Type
-------------------------------------------------------------------------
BAGG1 S none 1 0 NonS
BAGG10 D 0x8000, 000f-e267-57ad 2 0 Shar
Table 24 Command output
Field Description
Aggregation Interface Type
Aggregate interface type:
•
BAGG
—Layer 2 aggregate interface.
•
RAGG
—Layer 3 aggregate interface.
Aggregation Mode
Aggregation group type:
•
S
—Static link aggregation.
•
D
—Dynamic aggregation.
Loadsharing Type
Load sharing type:
•
Shar
—Load sharing.
•
NonS
—Non-load sharing.
Actor System ID
Local system ID, which contains the system LACP priority and the
system MAC address.
AGG Interface
Type and number of the aggregate interface.
AGG Mode
Aggregation group type.
Partner ID
System ID of the partner, which contains the system LACP priority
and the system MAC address.
Select Ports
Total number of Selected ports.
Unselect Ports
Total number of Unselected ports.
Share Type
Load sharing type: Only NonS is supported.
display link-aggregation verbose
Use
display link-aggregation verbose
to display detailed information about the aggregation
groups corresponding to the aggregate interfaces.
Syntax
display link-aggregation
verbose
[ {
bridge-aggregation
|
route-aggregation
}
[
interface-number
] ] [
|
{
begin
|
exclude
|
include
}
regular-expression
]
Views
Any view
Default command level
1: Monitor level
Parameters
bridge-aggregation
: Displays detailed information about the Layer 2 aggregation groups
corresponding to Layer 2 aggregate interfaces.