112
Hardware Command
compatibility
MSR3600-51F Yes
A Layer 2 Ethernet interface can be assigned to a Layer 2 aggregation group only, and a Layer 3
Ethernet interface can be assigned to a Layer 3 aggregation group only.
An Ethernet interface can belong to only one aggregation group.
Examples
# Assign Layer 2 Ethernet interface Ethernet 1/1 to Layer 2 aggregation group 1.
<Sysname> system-view
[Sysname] interface ethernet 1/1
[Sysname-Ethernet1/1] port link-aggregation group 1
# Assign Layer 3 Ethernet interface Ethernet 1/2 to Layer 3 aggregation group 2.
<Sysname> system-view
[Sysname] interface ethernet 1/2
[Sysname-Ethernet1/2] port link-aggregation group 2
reset counters interface
Use
reset counters interface
to clear the statistics of the specified aggregate interface or
interfaces.
Syntax
reset counters interface
[ {
bridge-aggregation
|
route-aggregation
} [
interface-number
] ]
Views
User view
Default command level
2: System level
Parameters
bridge-aggregation
: Clears statistics for Layer 2 aggregate interfaces.
The following matrix shows the
bridge-aggregation
keyword and hardware compatibility:
Hardware keyword
compatibility
MSR800 Yes
MSR 900
No
MSR900-E Yes
MSR 930
Yes
MSR 20-1X
No
MSR 20
No
MSR 30
Yes
MSR 50
Yes
MSR 2600
Yes
MSR3600-51F Yes
