113
route-aggregation
: Clears statistics for Layer 3 aggregate interfaces.
interface-number
: Specifies an aggregate interface by its number in the range of 1 to 1024 for Layer
2 aggregate interfaces and 1 to 16 for Layer 3 aggregate interfaces.
Usage guidelines
Before collecting statistics for a Layer 2 aggregate interface within a specific period, clear the
existing statistics of the interface.
•
If no keyword or argument is specified, the command clears the statistics of all interfaces in the
system.
•
If only the
bridge-aggregation
or
route-aggregation
keyword is specified, the command
clears the statistics of all Layer 2 or Layer 3 aggregate interfaces.
•
If the
bridge-aggregation
interface-number
or
route-aggregation
interface-number
option is
specified, the command clears the statistics of the specified Layer 2 or Layer 3 aggregate
interface.
•
The
bridge-aggregation
or
route-aggregation
keyword becomes available only after you
create Layer 2 or Layer 3 aggregate interfaces on the device.
Examples
# Clear the statistics of Layer 2 aggregate interface Bridge-Aggregation 1.
<Sysname> reset counters interface bridge-aggregation 1
reset lacp statistics
Use
reset lacp statistics
to clear the LACP statistics on the specified member ports or all member
ports, if no member ports are specified.
Syntax
reset lacp statistics
[
interface
interface-list
]
Views
User view
Default command level
1: Monitor level
Parameters
interface-list
: Specifies a list of link aggregation member ports, in the format
interface-type
interface-number1
[
to interface-type interface-number2
], where
interface-type
interface-number
specifies an interface by its type and number.
Examples
# Clear the LACP statistics on all link aggregation member ports.
<Sysname> reset lacp statistics
Related commands
display link-aggregation member-port
shutdown
Use
shutdown
to shut down the aggregate interface or subinterface.
Use
undo shutdown
to bring up the aggregate interface or subinterface.
