116
Number of Frames Discarded : 1
GARP statistics on port Ethernet1/2
Number of GVRP Frames Received : 3
Number of GVRP Frames Transmitted : 4
Number of Frames Discarded : 2
Related commands
reset garp statistics
display garp timer
Use
display
garp timer
to display GARP timers on specific ports. If no ports are specified, this
command displays the GARP timers on all ports.
Syntax
display
garp timer
[
interface interface-list
] [
|
{
begin
|
exclude
|
include
}
regular-expression
]
Views
Any view
Default command level
1: Monitor level
Parameters
interface interface-list
: Displays the GARP timer settings of one or multiple ports. You can specify up
to 10 port lists. By using each port list, you can specify a single port in the form of
interface-type
interface-number
, or a port range in the form of
interface-type interface-number1
to
interface-type
interface-number2
, where the end port number specified by
interface-number2
must be greater than
the start port number specified by
interface-number1
.
|
: Filters command output by specifying a regular expression. For more information about regular
expressions, see
Fundamentals Configuration Guide
.
begin
: Displays the first line that matches the specified regular expression and all lines that follow.
exclude
: Displays all lines that do not match the specified regular expression.
include
: Displays all lines that match the specified regular expression.
regular-expression
: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Examples
# Display GARP timers on port Ethernet 1/1.
<Sysname> display garp timer interface ethernet 1/1
GARP timers on port Ethernet1/1
Garp Join Time : 20 centiseconds
Garp Leave Time : 60 centiseconds
Garp LeaveAll Time : 1000 centiseconds
Garp Hold Time : 10 centiseconds
Related commands
•
garp timer hold
•
garp timer join
